低應力拉伸測試儀 型號：LSE/LSE-PC

適合標準：ASTM1676-99

測試程序：檢測漆包線的柔軟度

取三根40cm長的漆包線樣品，注意處理它們時不要損傷線的表面，以免影響終的測試結果。將線樣放置在兩個相距254mm（10英寸）的夾具之間，銅線預置51.75N/平方毫米的負荷，鋁線預置27.6N/平方毫米的負荷，用來測量柔軟度的比測儀須置，再將負荷增加至預置負荷的兩倍（即銅線103.5N/平方毫米和鋁線55.2N/平方毫米），停留30秒鐘，然后卸去兩倍的負荷，在比測儀上讀取總變形值△，用以下方式計算低應力延伸值。

                              △all

                     LSE =————&tim;100

                                10〞

重復測試另兩個樣品，計算三個樣品的平均值

—   適合線徑0.1～3.15mm（38-8AWG）

—   傳動部分采用高滾珠絲桿

—   全自動操作

—   自動計算預置負荷和載入砝碼

—   高測力傳感器，分辨率0.1N，過載150%

—   計算小值、值、平均值和標準偏差值

—   觸摸屏電腦（10英寸）。WINDOWS CE O.S   操作系統(tǒng)，采用圖形化表示低應力拉伸力（型號：LSE-PC）

—   可打印測試（型號：LSE-PC）

                                             LSE

LOW STRS ELONGATION TTER mod. LSE, LSE-PC

STANDARD: ASTM 1676-99

TT PROCEDURE:To determine the wire softns .

Take three sampl of enamelled wire 40 cm (1.5”) in length, paying attention to handle them with care avoiding deformation which will false the final tt rult. The sample shall then be placed between two jaws at a distance of 10”, a pre-load of 51,75 N/mm2 for copper wire and 27.6 N/mm2 for aluminium. The comparator used to measure the softns must be zeroed, double the tt weight (103,5 N/mm 2 for copper and 55.2 N/mm2 for aluminium) for a time of 30”, take out then the doubled weight, read on comparator the ?allvalue,then calculate the low strs elongation value with the following formula:

?                                all

L.S.E = -------- x 100

10”

Calculate then the average of three measurements.

-Suitable for wire diameter range from 0,10 mm up to 3.15 mm ( 38 – 8 AWG).

-Actuator with high precision ball screw.

-Fully automatic.

-Automatic calculation of pre-load and load weight.

-High rolution load cell, rolution 0.1N, overload 150%.

-Calculation of minimum, maximum, average and standard deviation valu.

-Touch screen computer (10”), Windows CE O.S., with graphical reprentation

of low strs elongation force (mod. LSE-PC).

-Print-out of tt report (mod. LSE-PC).

OPTIONS:

-Rectangular and heavy duty wire