FZ-8812 換氣式空氣熱老化試驗機
CONVEION AND VENTILATION AGING OVEN
UL1581，VDE，CCC
本機在試驗電線電纜緣體或被覆之橡塑膠試片，以比較試片老化前與老化后之拉強度及伸長率，本機以熱風循環方式，促使試片老化，內箱密閉性佳，具有抽換內箱空氣裝置，設有溫自動切斷保護。
另附有瓦時計及計時器，具有換氣量測定功能。
This tester is designed to test rubber & plastic specimens of cord's insulator or jacket。The tensile strength，elongation and hardness of dumbbell specimens before / after aging can be compared。This tester uses hot-air-circulation to make specimens aging。Its interior is sealed well and it is equipped with the induced draft device & auto shut-off proteion if over-heated。Inner air is changeable。Also can be used as a drying oven by introducing web-frame。
| 內箱尺寸 Interior dimension | 60 x 60 x 60cm |
| 換氣率 Air-change rate | 3 ~ 250 次 / 小時可調 |
| 溫度控制器 Temp. controller | PID 數位設定 PID dial setting |
| 溫度范圍 Temperature range | 室溫 Room temp. +10℃ ~ 300℃ |
| 試片旋盤 Specimen's rotary disk | 二層 Two layers |
| 旋盤轉速 Rotary disk rotating speed | 每分鐘 8 ~ 10 轉 |
| 材質 Material | 內膽及外殼為不銹鋼制造 |
| 電源 Power | AC220V / 50Hz |
