1. 設備介紹Device introduction
本機可測試橡膠,塑膠,皮革,尼龍線,織物,紙及航空,包裝,建筑,石化,電工,車輛等材料之拉伸,壓縮,彎折,剪力,粘接力,剝離,等試驗. The machine can test rubber, plastic, leather, nylon yarn, fabric, paper and packaging, construction, aviation, petrochemical, electric vehicles and other materials, tensile, compression, bending, shear, adhesive, peeling, tearing test.
產品選型與技術參數Model selection & Technical parameters | ||||||
型號選擇Model No. | RX-10KN | RX-20KN | RX-50KN | RX-100KN | RX-200KN | RX-300KN |
容量選擇Capacity selection | 10KN | 20KN | 50KN | 100KN | 200KN | 300KN |
控制方式 Control te | 單片機控制MCU Control | Model No.+M | ||||
電腦控制Computer control | Model No.+C | |||||
單位切換Switch unit | kgf, lbf, N , kN, kPa, MPa | |||||
荷重分解度load resolution | 1/250,000 | |||||
荷重Load precision | + / - 1.0% | |||||
行程Maximum stroke: | 600mm | |||||
寬度Effective width | 360mm | |||||
測試速度Test speed | 0.01~200 mm/min | |||||
位移分解度Displacement resolution, | 0.01 mm | |||||
數據采樣頻率The data sampling frequency, | 200 次/秒 | |||||
驅動電機The drive motor | AC servo motor | |||||
傳動桿Tranission mechani | High Accuracy of Ball Screw | |||||
主機尺寸Size (W×D×H) | 670x350x1800 mm | |||||
通訊接口Communication interface | RS232 | |||||
機臺重量Weight | 150kg | |||||
電 源Power supply | AC220V or According to country designated |
