跳線架，50對有腿110跳線架，50對無腿跳線架，機架式50對跳線架規格介紹
產品型號 | MY-TXJ1101 | 產品類型 | 100對無腿110跳線架 |
產品規格 | 19″標準安裝 | 產品材質 | 鋼板、PC |
◆主要技術參數 *產品材質：采用鋼板及PC注塑而成 *IDC：磷青銅，鍍銀（20~50uiLZh），適用線徑為0.4~0.6mm，壽命不小于200次。 *阻燃性：采用PPO+PC注塑而成，滿足國際標準 *接觸電阻：正常大氣壓條件下不大于2.5mΩ（體電阻） *緣電阻：正常大氣壓條件下不小于1000MΩ *電強度：DC 1000V（AC、700V）1分鐘內無擊穿和飛弧現象 *標準：依據國際標準ISO/IEC11801；TIA/EIA568設計制造 ◆應用范圍 *110配線架起著傳輸信號的靈活轉接、靈活分配以及綜合統一管理的作用 | |||
Main technical parameters are in pieces
* the product material: made from steel and PC injection
* IDC: phosphor bronze, silver plated (20 ~ 50 uilzh), suitable for wire diameter is 0.4 ~ 0.6 mm, life not less than 200 times.
* flame retardant: the PPO and + PC injection, meet international standards
* contact resistance: under the condition of normal atmospheric pressure is not more than 2.5 m Ω (excluding body resistance)
* insulation resistance: not less than 1000 m Ω under condition of normal atmospheric pressure
* electric strength: DC 1000 v (AC, 700 v) 1 minutes without breakdown and flashover phenomenon
* standard: according to the international standard ISO/iec11801and; TIA/EIA568 design and manufactur
Application range in pieces
* 110 distribution frame plays a flexible switching, flexible allocation of tranission signal and comprehensive unified management role
